Electrical testing & commissioning, explained simply
Going for your first transformer FWT, or tired of finding out later what you missed at the test bay? This kit is a practical field guide written from real factory witness tests of dry-type (cast resin) transformers.
What's inside
14-page PDF field guide
• Who does what at FAT, FWT and SAT
• Document pack and pre-FWT checklist
• Reading the QAP: W, R and H points
• The 7-step routine for witnessing any test
• Safety at the HV test bay
• 14 test-by-test check cards: rating plate, winding resistance, ratio and vector group, IR, magnetic balance, no-load loss, load loss and impedance, applied voltage, induced voltage, partial discharge, lightning impulse, temperature rise, temperature monitoring and M'Box, enclosure and BOM
• 11 things witnesses commonly miss
• Writing and closing observations
• Sign-off: witnessed vs accepted, with status lines you can use
• One-page formula card with a worked ratio example
Excel toolkit (works in Excel and Google Sheets)
• Pre-FWT checklist and test record sheet
• Calibration register that flags expired certificates
• Winding resistance and ratio calculators
• IR before/after HV tests
• Observation tracker that flags anything closed without an evidence review
Who it's for: freshers and site engineers, T&C and commissioning engineers, client-side witnesses and QA/QC engineers.
Please note: this is an educational field guide. It does not replace the applicable standards or your approved project documents (specification, QAP, TDS). Digital download for personal use.